Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
SkyTools WiFi Virtual Serial Port - TCP/IP
#1
Recently, I installed the ASCOM 6 Platform plus the current Sky Commander driver for my Orion XX12g.
I have noticed SkyTools runs a little sluggish and freezes from time to time once connect to the telescope.

I still have to do more research since I also switch to the WiFi solution from Orion, almost at the same time. I know, never good to implement many changes at once.

But my question: are there any reported issues with SkyTools 3 and ASCOM 6 or should I stick to ASCOM 5?
And one more, What is the best/better Virtual ComPort software? I'm using the HW Group VCP which seems to drop the connections once in a while and recovers.

Thanks.
Reply


Messages In This Thread
SkyTools WiFi Virtual Serial Port - TCP/IP - by Spider - 2018-10-09, 12:29 PM
RE: SkyTools 3 ASCOM 6 - by theskyhound - 2018-10-09, 04:03 PM
RE: SkyTools 3 ASCOM 6 - by Spider - 2018-10-18, 01:49 PM
RE: SkyTools 3 ASCOM 6 - by Spider - 2019-03-12, 03:29 PM
RE: SkyTools 3 ASCOM 6 - by theskyhound - 2019-03-12, 03:50 PM
RE: SkyTools 3 ASCOM 6 - by Spider - 2019-03-12, 04:05 PM
RE: SkyTools 3 ASCOM 6 - by Spider - 2019-03-13, 12:57 AM
RE: SkyTools 3 ASCOM 6 - by theskyhound - 2019-03-13, 01:42 AM
RE: SkyTools 3 ASCOM 6 - by Spider - 2019-03-13, 01:47 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)