Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Installing on another device after upgrading to the bundle
#1
When you upgrade to the bundle from the Pro Edition or Imaging, you are issued an update code. This update code requires version 4.0g or later to be installed.

1. If you saved your original SkyTools 4 Imaging setup file, please download the more recent version of the setup file to use for installing on the second device.

2. When you applied the upgrade code, your serial number was changed to reflect your new product. Open About SkyTools from the Help menu and write down your license information. When you install the SkyTools 4 Bundle on your second device, use this license instead of the one that was sent with your original purchase.
Clear skies,
Greg

SkyTools Developer

What is support? Anything you run into that does not seem to be working right. Please use the appropriate support forum for that. It is vitally important to include the following information in your post: SkyTools product, edition, and version. E.g. SkyTools 4 Visual Standard Edition V4.0g. It is also important to be specific about the tool you are reporting on: E.g. Nightly Planner, Scheduler, and if Visual Real Time, be sure to include if you are using Best Now or SkyTour. Including this information right away means that I won't have to ask for it, which just takes longer. Please do not seek support in more than one place.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)