I have received the data actually used for T68-A071 CMOS Camera:
Lowest Read Noise
Gain 240
Offset 65
USB Limit 80
This is a quite high gain with the result that the FWC drops to 3000 and the dynamic range loose 2 stops.
Check the FWC in the setup and replace it with this new value.
I think we can now use these figures for more accurate calculations.
Question: I have changed the gain data for the camera in the setup, lets say from 50 to 240, but in the fields of the exposure calculator there is no change. The exp time and the snr are the same.
Why is there no difference?
Ed