2024-05-13, 04:16 PM
Hello Joe,
There are several places where this can be controlled in to one extent or another.
On the Telescope Control Menu: there are the following selection that can be checked on/off: Automatically mark objects as Observed.
You can reset all of the status values via the List Functions menu --> Reset All Objects to Unobserved Status.
I urge you to read the appropriate topic in the help system under "Real Time Observing." These topics are separated by how you are using Real Time in the filed, which mode, e.g. on-screen charts, goto telescope, etc. Similarly, the video tutorials I posted a link to also provide this information. In that case its about selecting the right video.
There are several places where this can be controlled in to one extent or another.
On the Telescope Control Menu: there are the following selection that can be checked on/off: Automatically mark objects as Observed.
You can reset all of the status values via the List Functions menu --> Reset All Objects to Unobserved Status.
I urge you to read the appropriate topic in the help system under "Real Time Observing." These topics are separated by how you are using Real Time in the filed, which mode, e.g. on-screen charts, goto telescope, etc. Similarly, the video tutorials I posted a link to also provide this information. In that case its about selecting the right video.
Clear skies,
Greg
Head Dude at Skyhound
Greg
Head Dude at Skyhound