Update to Version 4.x.11.10

[PMSchu]

Hi Greg,

When I started ST4v 4.1.11.07 this morning I got this News screen after startup: 

I've been getting this same screen since May & didn't think anything of it. There was no option/prompt to install the Update to 4.1.11.10. I was able to Get the Update manually via the Setup>Updates, Registration and Feedback>Check for Updates path. ST4 Imaging and Visual are still showing the same News screen from May 3 after the newly installed Update. I've kept the News screen because it offers easy access to your Comet Hunting page.

Just thought that you'd like to know about the absense of a notification in SkyTools about the Update this time. 

Phil S.

Hi Phil,

The way I imagined this would work is that people would check the box to dismiss the dialog. Then it only comes back when I update the data that it works from. I didn't actually update this information yet for version 4.x11.10, so you are still seeing the old one.

But I am pretty sure there were more recent versions than V4.x.11.07... I wonder if not having ticked the box is blocking new ones from appearing? I'll have to look into it.

More importantly, what is your current version on the About dialog? The latest is version 4.x.11.10.

Sorry, I forgot to state that SkyTools manual update performed the update to version 4.1.11.10 flawlessly, FWIW.

Phil S.

---

Also, the check for updates was not working the way I had intended it to work. I fixed it so it now works differently. To keep starting up working as quickly as possible, it is supposed to only check for updates every few hours or so. So if you recently started SkyTools and it did the check, and no new version was found, then if you start it again, it won't even check to see if there is a new version until several hours have passed. My guess is that you ran into that. Maybe I should shorten the time period.

Hi Greg,

When I start SkyTools at the start of the day, I never close it until I shut down the computer in the evening. I like to work with it throughout the day. Unless it's performing MP DB updates it doesn't consume significant machine resources. At that it only uses one thread of one of the 12 cores on the machine (~4%). You've created some very efficient code, thank you very much.

Phil S.